These battery chargers are specially designed for Spray Pump Battery Charger taking specific requirements into consideration.These based on SMPS technology adopting latest Pulse Width Modulation technique.
Other Non-standard ranges like 24 Volts, Suitable for Two Batteries in Sets also can be made available against specific request.
Company with more than 20 years of Experience in switching power supplies and
charger
Manufactured in a state - of - the - art ISO – 9001:2015 Facility.
Highly qualified & experienced R&D team.
Technical Specifications | 12V, 0.7A | 12V, 1.7A | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Electrical Characteristics | |||||||||||
Input Voltage | 150 – 270V AC | 150 – 270V AC | |||||||||
Output Voltage-Boost mode | 14.4V DC | 14.4V DC | |||||||||
Output Voltage-Float mode | 13.8V DC | 13.8V DC | |||||||||
Charging Current-Boost mode | 0.7A | 1.7A | |||||||||
Leakage Current @ 230 V ac | < 2mA | < 2mA | |||||||||
Line regulation | < 1% | < 1% | |||||||||
Load regulation | < 1% | < 1% | |||||||||
Ripple content | 150mV p-p | 150mV p-p | |||||||||
Dielectric strength:
|
|||||||||||
Protections | |||||||||||
In rush current | Limited by NTC Thermistor | ||||||||||
Over voltage at Input | Shut down above 300V AC | ||||||||||
Under voltage at Input | Cutoff at 140V AC. Cut in at 160V AC | ||||||||||
Over voltage at Output | 29.5V | 15.5V | |||||||||
Short circuit at Output | Protected | Protected | |||||||||
Overload at Output | Protected | Protected | |||||||||
Reverse polarity of Battery | Protected | Protected | |||||||||
Other Features | |||||||||||
Indications | Boost/ Float mode-Dual Colour LED | ||||||||||
Mechanical | |||||||||||
Type of mounting | Double Top mounting Type | ||||||||||
Dimensions LxWxH | 122x54x36 | 122x54x36 | |||||||||
Environmental | |||||||||||
Operating Temperature | 0 – 50 Deg.C | ||||||||||
Operating Relative Humidity | 0 – 80% Max. | ||||||||||
Vibrations | 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes |