E – BIKE BATTERY CHARGER
These battery chargers are specially designed for E-Biketaking
specific requirements into consideration.These are based on
SMPS technology adopting latest Pulse Width Modulation
technique.
- Available ranges are as follows
- 48 Volts, 3 Amps To 48 Volts , 15 Amp.
- 60 Volts, 3 Amps To 60 Volts , 15 Amp.
- 12 Volts, 3 Amps To 72 Volts , 15 Amp.
- Other Non-standard ranges also can be made available against specific request.
Company with more than 20 years of experience in switching power
supplies and charger. Manufactured in a state-of-the-art ISO – 9001:2015 Facility. Highly qualified & experienced R&D team.
- SUTTABLE FOR
- LEAD ACID
- Lithium Iren
- LiPO4 Type of Better
| Technical Specifications | 48V,10A | 48V,5A | ||||||
|---|---|---|---|---|---|---|---|---|
| Electrical Characteristics | ||||||||
| Input Voltage | 170 – 300V AC | 170 – 300V AC | ||||||
| Output Voltage-Boost mode | 56V DC | 56V DC | ||||||
| Output Voltage-Float mode | 53.6V DC | 53.6V DC | ||||||
| Charging Current-Boost mode | 3A | 3A | ||||||
| Leakage Current @ 230 V ac | < 2mA | < 2mA | ||||||
| Line regulation | < 1% | < 1% | ||||||
| Load regulation | < 1% | < 1% | ||||||
| Ripple content | 150mV p-p | 150mV p-p | ||||||
Dielectric strength:
|
||||||||
| Protections | ||||||||
| In rush current | Limited by NTC Thermistor | |||||||
| Over voltage at Input | Shut down above 300V AC | |||||||
| Under voltage at Input | Cutoff at 140V AC. Cut in at 160V AC | |||||||
| Over voltage at Output | 59V | |||||||
| Short circuit at Output | Protected | |||||||
| Overload at Output | Protected | Protected | ||||||
| Reverse polarity of Battery | Protected | |||||||
| Over voltage due to external source | Protected | Protected | ||||||
| Other Features | ||||||||
| Indications | Charging ON, Mains ON | |||||||
| Mechanical | ||||||||
| Dimensions WxDxH | 160x90x60 | |||||||
| Mounting | Table top mounting | |||||||
| Approx. Weight | 500g | |||||||
| Environmental | ||||||||
| Operating Temperature | 0 – 50 Deg.C | |||||||
| Operating Relative Humidity | 0 – 80% Max. | |||||||
| Vibrations | 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes | |||||||
