Yo Bike Battery Charger

These battery chargers are specially designed for Yo-Bike / E-Bike taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique.

With deep understanding of market trend, we have come out with Yo Bike Battery Charger. These battery chargers are designed by our vendors utilizing contemporary machinery and are accessible in varied specifications too.

Available ranges are as follows

48 Volts, 2.5 Amps - Other Non-standard ranges also can be made available against specific request.

 

Technical Details:
Technical Specifications 48V, 2.5A
Electrical Characteristics
Input Voltage 170 – 300V AC
Output Voltage-Boost mode 56V DC
Output Voltage-Float mode 53.6V DC
Charging Current-Boost mode 2.5A
Leakage Current @ 230 V ac < 2mA
Line regulation < 1%
Load regulation < 1%
Ripple content 150mV p-p
Dielectric strength
Between Input & Output 2kV AC
Between Input & Earth 1.5kV AC
Between Output & Earth 1.5kV AC
Protections
In rush current Limited by NTC Thermistor
Over voltage at Input Shut down above 300V AC
Under voltage at Input Cutoff at 140V AC. Cut in at 160V AC
Over voltage at Output 59V
Short circuit at Output Protected
Overload at Output Protected
Reverse polarity of Battery Protected
Over voltage due to external source Protected
Other Features
Indications Charging ON, Mains ON
Mechanical
Dimensions W x D x H 160 x 90 x 60
Mounting Table top mounting
Approx. Weight 500 g
Environmental
Operating Temperature 0 – 50 Deg.C
Operating Relative Humidity 0 – 80% Max.
Vibrations 10 – 500Hz 2G-10 min. / 1 Cycle 60 min. along all three axes